Maintenance; The Hepa Disposable Filter Dust Bag - Oreck HALO User Manual

Maintenance

Filter dust bag
(Replacement part
number HB8PK)
Bag stiffener
14
!
Performing maintenance on the vacuum while it is
plugged into a wall outlet may result in unexpected
vacuum operation, shock and personal injury. Always
turn the vacuum OFF and unplug before performing
inspection and maintenance.

The HEPA Disposable Filter Dust Bag

The Oreck Halo vacuum employs a disposable filter dust bag that is
made with high quality HEPA material for maximum air filtration
and home air quality. The HEPA disposable filter dust bag plays a
crucial role by trapping the dirt and germs the vacuum suctions from
your home. HEPA disposable filter dust bags have been specifically
designed for use with the Oreck Halo vacuum.
For maximum performance, the HEPA disposable filter dust bags
need to be replaced when dirt reaches the fill line on the bag. Do not
allow the bags to overfill, only replace with Oreck Halo Type HL filter
dust bags.
To replace the HEPA disposable filter dust bag:
Bag dock clip
WARNING!
1. Unzip the outer bag until there is enough
room to remove the disposable filter dust bag.
. Grasp the blue bag clip located just above
the filter dust bag and gently pull the bag
towards you.
3. Gently pull the filter dust bag by sliding
the cardboard bag stiffener out of the bag
dock. The Saniseal
automatically.
4. Replace with a new clean HEPA
disposable filter dust bag (reverse steps 2 & 3).
5. Ensure the bag dock clasp clicks securely into
the top plastic casing before zipping up the
outer bag. Do not turn the vacuum on without
a filter dust bag in place.
dust seal will close
®