Use; Operating The Vacuum - Oreck HALO User Manual

Use

*Note:
The second button on
the handle turns the
brushroll ON/OFF.
Turn this ON for
maximum suction and
cleaning, or OFF to
vacuum non-carpeted
floors and sensitive
rugs or carpets.
Power Cord
Handle release
pedal
11
Important! Ensure the Oreck Halo vacuum disposable dust filter bag is
securely in place and the outer bag is zipped. Dust and debris will be
released into the room if this is not done.

Operating the Vacuum

1. Place the vacuum on the floor
. Set the carpet height adjustment
On/off
switch
Cord dump
3. Plug in the power cord.
4. Depress the handle release
5. Lean the handle back gently to
6. Press the ON/OFF switch to
7. After use: Place the handle
Cord wrap
or flat surface.
to the desired position (Low
- High).
The Brushroll must rest on the
carpet for effective cleaning.
Note: See Using a Hose or
Attachment if vacuuming a
sofa, couch or stairs.
pedal, located on the left side
of the base.
a comfortable position.
turn the vacuum ON.
See above *Note.
assembly in the locked, upright
position. Securely wrap the
power cord around the cord
dump and cord wrap.
Height adjustor