UPS front panel controls
The front panel is shown with the bezel removed.
Item
Description
1
On button
2
Standby button
3
Test/Alarm Reset button
4
Configure button
Function
Powers up the UPS
("Starting power to the
load" on page 24)
Places the UPS in Standby mode (on page
27)
Silences UPS alarms
("Silencing an audible
alarm" on page 31)
Initiates a self-test
("Initiating a
page 30)
Places the UPS in Configure mode (on
page 28)
self-test" on
Component identification 7