Appendix A: Integration And Usage Tips - Intel SC5650BCDP Technical Product Specification

Appendix A: Integration and Usage Tips

Appendix A: Integration and Usage Tips
This section provides a list of useful information unique to the Intel
that you should keep in mind while integrating the server system.
• ®
The Intel Server System SR1630BC requires the use of a shielded LAN cable to
comply with Immunity regulatory requirements.
• ®
Intel Remote Management Module 3 is not supported the Intel
SR1630BC because of mechanical issue.
•
Management feature is not support on the power supply of Intel
SR1630BC.
• ®
The Intel Server system SR1630BC supports one riser card that supports one low-
profile half-length PCI Express* x8 add-in card which consumes power less than 15 W.
•
Processor fans are not needed and are not supported. The system fan module provides
the necessary cooling needed for the system.
•
You must use the system air duct to maintain system thermals.
•
System fans are not hot-swappable.
•
A screw on the front edge of the top cover is required when the unit is installed in a user-
accessible environment.
•
The FRUSDR utility must be run to load the proper sensor data records for the server
chassis onto the server board.
•
Make sure the latest system software is loaded. This includes the system BMC firmware,
FRUSDR, and BIOS. You can download the latest system software from:
http://support.intel.com/support/motherboards/server/S5500BC/
Revision 1.5 Intel order number E44588-005
Intel® Server System SR1630BC TPS
®
Server System SR1630BC
®
Server System
®
Server System
39