Getting Started; Power Source; Battery Installation; Battery Notice - VTech 80-065041 - Nitro Web Notebook User Manual

GETTING STARTED

POWER SOURCE

The Nitro Web Notebook
a VTech 9V adaptor (sold separately). The "AA" sized batteries included in
®
the unit are for demo purposes only and are not long-life batteries.
If you are using a power supply adaptor, please remember to empty the
battery slot first.

BATTERY INSTALLATION

NOTE: For best performance, remove all factory
installed batteries and use new , alkaline batteries.
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit
and open it.
3. Insert 3 "AA" sized batteries as illustrated.
4. Close the battery cover.
RECHARGEABLE BATTERIES ARE NOT RECOMMENDED.

BATTERY NOTICE

• The use of new alkaline batteries is recommended for maximum performance.
• Do not try to recharge non-rechargeable batteries.
• Rechargeable batteries are to be removed from the toy before being
charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Do not mix new and used batteries.
• Only use batteries of the recommended or equivalent type.
• Install batteries correctly observing the polarity (+, -) signs to avoid leakage.
• Batteries that have run out of energy must be removed from the toy.
• Do not short circuit the supply terminals.
• Do not use more batteries than recommended.
• Remove batteries from the toy if it will not be used for an extended period of time.
• Do not dispose of batteries in fire.
2
operates on 3 "AA" sized batteries (AM-3/LR6) or
™