Supplied Accessories; Installing The Batteries; Attaching The Base; Mounting The Unit On Your Furniture - Magnavox 37MD311B Owner's Manual

8

Supplied Accessories

Owner's Manual Quick Start Guide
TV base and 3 screws (M4 x 20)
Remote Control
(NF801UD)
Batteries
(AAA, 1.5V x 2)
Note
• If you lose the screws, please purchase M4 x 20 Phillips head
screws at your local store.
• If you need to replace these accessories, please refer to the part
name and No. with the illustrations and call our toll free customer
support line found on the cover of this manual.
When using a universal remote control to operate this unit.
• Make sure the component code on your universal remote control
is set to our brand. Refer to the manual accompanying your
remote control for more details.
• We do not guarantee 100% interoperability with all universal
remote controls.

Installing the Batteries

Install the batteries (AAA, 1.5V x 2) matching the polarity
indicated inside battery compartment of the remote control.
Battery Precautions:
• Be sure to follow the correct polarity as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and
Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old
batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the
batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries; they can overheat and rupture.
Registration card
If you have any questions, please visit our website at
www. magnavox.com/support
Quick
Start
EN Installation
FR Installation
ES Instalación
Best
Better
Good
AC power cord

Attaching the Base

You must attach the base to the unit to have it as a table top
unit. Be sure the front and rear of the base match the proper
direction. At least 2 people are required for these steps.
1
Spread a thick and soft cloth over a table as shown at step 2.
Place the main unit face down onto it. Make sure not to
damage the screen.
2
Insert 2 hooks under the
bottom of the main unit
into base holes. (shown by
arrow ➀ ), then move the
base in the direction as
shown by arrow ➁ until it
stops and the screw holes
are aligned. Make sure not
to put the AC power cord between the base and the unit.
3
Drive Phillips head screws
into the 3 threaded holes
at the bottom of the base
until they are tight.
To remove the base from this unit
• Unscrew the Phillips head screws in step 3.
After the screws are removed, move the base in the opposite direction
as shown by arrow in step 2, then pull the base up toward the rear of
the unit. Be careful not to drop the base when you remove it.
Note
• When attaching the base, ensure that all screws are tightly fastened. If
the base is not properly attached, it could cause the unit to fall, resulting
in injuries as well as damage to the unit.
• Make sure to use a table which can support the weight of this unit and
is larger than this unit.
• Make sure the table is in a stable location.
• When attaching the base, ensure that FRONT
upward. If it's not upward, the 2 hooks don't fi t in the base.

Mounting the Unit on Your Furniture

Screw this unit on your furniture tightly using wood screw (not
supplied) in the hole at the back of the base as shown.
• Recommended screw dimension : 0.201 x 0.788 inches (5.1 x 20 mm)
rear of the unit rear of the unit
Note
• When you remove this unit make sure to unscrew the wood
screw from your Wood Stand, Furniture and other wood item.
➁
➀
written on the base is
↑
screw hole screw hole