Page 1
Owner’s Manual Manuel du Propriétaire Manual del Propietario 37MD311B LCD TV/DVD Necesita ayuda inmediata? 1-866-341-3738 1-866-341-3738 1-866-341-3738 Quick Use Guide Inside! Guide d’usage Rapide Incluse! Guía de Uso Rápido Incluida! MODEL NUMBER SERIAL NUMBER...
Page 2
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.com/support to ensure:...
English IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. 16. Tilt/Stability - All televisions must comply with recommended Keep these instructions. international global safety standards for tilt Heed all warnings. and stability properties of its cabinet design. Follow all instructions. •...
Page 4
• For product recycling information, please visit - www.magnavox.com • Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
OPERATING DVD MAGNAVOX is a registered trademark of Philips Electronics North Playable Media America Corporation and is used by Funai Electric Co. Ltd. and Funai Unplayable Media Corporation, Inc.
English Features Dolby Digital Sound • DTV / TV / CATV • Enjoy Dolby Digital multi-channel surround sound when you You can use your remote control to select channels which are connect the unit to your Dolby Digital decoder. broadcast in digital format and conventional analog format. Also, •...
Be sure the front and rear of the base match the proper direction. At least 2 people are required for these steps. If you have any questions, please visit our website at www. magnavox.com/support Quick Start Spread a thick and soft cloth over a table as shown at step 2.
English Remote Control Function 6 MENU p. 17 ➠ 7 ▲/▼/◄/►(cursor) p. 13 ➠ 8 OK p. 13 ➠ 9 BACK p. 16 ➠ 10 PREV CH p. 14 ➠ Press to return to the previously viewed channel. 11 VOL + / − p.
Control Panel 1 STAND BY indicator Lights up red when the unit goes into standby mode. 2 POWER ON indicator Lights up green when power is on. 3 Infrared sensor window Receives infrared rays transmitted from the remote control. 4 DISC indicator Lights up orange when a disc is inserted.
English Terminals Side Panel 13 S-Video / Composite Video / Audio (L/R) Input jacks for VIDEO p. 35 ➠ 14 HDMI 2 Input jack p. 12, 34 ➠ Rear Panel 15 Disc loading slot p. 29 ➠ 16 AC power cord Inlet p.
Connection to Cable Receiver or PREPARATION Satellite Box Use an HDMI or Component Video cables to connect the HDMI or the Component Video Input jacks of the unit to the No supplied cables are used with these connections: HDMI or the Component Video output jacks of the cable •...
English Use ◄/► to select the desired location setting, then press These operations are accessible by remote control. Some may also be accessible by controls on the main unit. [Home] is ENERGY STAR ® qualifi ed setting. Initial Setup Initial Setup Select “Retail”...
WATCHING TV Sleep Timer can set the unit to go into standby mode after an incremental period of time. Press SLEEP repeatedly to change the amount of time (increases Sleep 120min. the time by 30 minutes up to 120 minutes). Press SLEEP once to call up the display for checking the remaining time.
English TV Screen Display Mode 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. Press FORMAT repeatedly to switch the TV aspect ratio. For 16:9 video signal Normal displays a 16:9 picture at its original size.
TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. In the digital mode, the detailed broadcasting information for the current off the air channel such as program title and program guides are displayed.
English USING FUNCTIONS This section describes the overview of the main menu displayed when you press MENU. The main menu consists of the function setting items below. Use ▲/▼ to select a desired menu and an item, then Press MENU to display press OK to determine the setting.
Picture Smart Sound Standard Picture Sound Equalizer Before you begin: Channel Auto Volume Leveling You must set [Home] in [Location]. p. 24 Features TV Speakers Ext. Amp ➠ Language Primary MTS Stereo Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.
English Note Channel • After setting [Autoprogram], using CH + / − on the remote control skips unavailable programs automatically. • If you are not receiving a signal from your cable service, contact Before you begin: the Cable provider. • If you press or MENU during autoprogram, the setup of TV Make sure the unit is connected to antenna or cable.