Adding And Erasing Channels In Memory - Samsung CXD1332 Owner's Instructions Manual

TV O
2
You will see the Setup
menu.
Press CH
"Auto Program" is
highlighted.
Press VOL- or VOL +
button to begin
automatic programming.
4
When the programming
process is complete,
press CH
scan those channels
stared in the TV/VCR's
memory.

Adding and Erasing Channels in Memory

You can manually add a channel to memory or erase one from memory.
To add a channel to memory or erase a channel from memory.
1 1
Use the number buttons
to select the channel
you want to add to the
TV/VCR's memory or
erase from the TV/VCR's
memory.
3.4
CHAPTER THREE TV OPERATION
PERATION
until
or CH t o
The TV/VCR automatically
cycles through all the channel
numbers and places only the
available channels in memory. This
takes about one to two minutes.
Press MENU at any time to interrupt
the programming process and return
to normal viewing.
Occasionally the TV/VCR will
miss an active channel if the signal is
weak or if the channel is off the air
when you start programming.
Likewise, an unavailable channel
may be included in channel memory
if there is noise or stray signals on
that channel during programming.
For information about adding and
erasing channels from memory, see
below.
Always press 0 before a single-
digit channel number. For example,
to select channel 8, press 0 then
To add three-digit cable-TV
channels, press "+l00," then press
the next two digits For example, to
select channel 104, press "+100,"
then press "0," then "4".
8.