Selecting The Signal Source; Programming The Channels; Storing Channels In Memory - Samsung CXD1332 Owner's Instructions Manual

TV OPERATION
S e l e c t i n g t h e S i g n a l S o u r c e
The first step m programming your TV/VCR is to select the signal source in your home's
antenna or cable TV system
1
With the main menu on
the screen, press CH
until "Setup" is
highlighted.
Press VOL. +.
2
You will see the Setup
menu. Air/Cable" is
highlighted.
Press VOL - or VOL +
button to select
"Antenna," "Cable
STD," "Cable HRC," or
Cable IRC."
P r o g r a m m i n g t h e C h a n n e l s

Storing Channels in Memory

Your TV/VCR can automatically memorize all the channels you receive. Once these
channels are in memory you can use the CH
eliminating the need to enter individual channel digits with the number buttons.
1
With the menu on the
screen, press CH until
"Setup" is highlighted
Press VOL +.
Timer Record
continued...
For information on viewing the
main menu, see page 3.2
If your TV/VCR is connected to
an antenna, select "Antenna ." If you
have cable TV, select "Cable STD,"
"Cable HRC," or "Cable IRC,"
depending on the type of cable system
you have.
If you are not sure what type of cable
system you have, contact your cable
company.
and buttons to select the channels,
For information on viewing the
main menu, see page 3.2.
You must have already selected the
signal source. For more information
on selecting the signal source, see
above.
C
H A P T E R
3 . 3
T T V O
H R E E P E R A T I O N