Replacing The Bucket Seats - Chevrolet VENTURE 1998 Manual

6.
Remove the seat by
rocking it slightly
towards the rear
of the
vehicle and then pulling
it out. This should be
done in one motion.
Replacing the Bucket Seats
Don't put the seats in so they face rearward because they
won't latch that way. If you want more storage room
behind the seat, adjust the seat by sliding
it forward.
The bucket seats have seat position labels, located on the
back
of
the seat, showing where the seat must go.
Follow that diagram. See "Seat Controls" in the
beginning of this section for more details. The seat
must be placed in the proper location for the legs to
attach correctly.
RIGHT ONLY seats that don't have the built-in child
restraint option
fit
only in the right location of either
row, the
E and
F
or I and J
sets of floor cups.
The CENTER OR LEFT seat fits in the center location
or in either left location, the A and B, C and D or G
and H sets of floor cups.
The LEFT ONLY seats that don't have the built-in child
restraint option fit only in the left location of either row,
the A and B or
G and H
sets of floor cups.
RIGHT ONLY seats that have the built-in child restraint
option fit only in the right location of the second row,
the
E and F
sets of floor cups.
LEFT ONLY seats that have the built-in child restraint
option fit only in the left location of the second row, the
A and B sets of floor cups.
1-30