Taillamps, Turn Signal, Stoplamps; And Back-Up Lamps - Chevrolet VENTURE 2004 Owner's Manual

Taillamps, Turn Signal, Stoplamps

and Back-up Lamps

1. Open the liftgate.
2. Remove the two screws from the taillamp housing
on the inboard side.
3. Pull off the entire taillamp housing.
The locator/retaining pins on the outboard side are
part of the lamp assembly and will remain intact
during removal.
4. Remove the bulb holder by pressing the four
retaining tabs and pulling the holder away from the
assembly.
5-57