Accessing A Lan Device - ZyXEL Communications N4100 User Manual

Chapter 28 System Status
Table 60 SYSTEM STATUS > LAN DEVICES (continued)
LABEL
Device Server
Port
Device MAC
Address
Application
Interface

28.8.1 Accessing a LAN Device

Before you can access a LAN device behind the N4100, the following requirements
must be met.
• The LAN device has a web-based management interface and it is enabled.
• You have set up the virtual port mapping to the LAN device server port in the
ADVANCED > LAN DEVICES screen.
• The LAN device status is OK in the SYSTEM STATUS > LAN DEVICES screen.
There are two methods to access the LAN device: directly or through the web
configurator.
To access the LAN device through the web configurator, open the SYSTEM
1
STATUS > LAN DEVICES screen and click the device name. A new Internet
browser should display showing the login screen of the LAN device management
interface.
To directly access the LAN device, enter the WAN IP address of your N4100 and
2
the virtual port number of the LAN device separated by a colon. For example,
enter "http:// 192.168.1.1:60001" where 192.168.1.1 is the WAN IP address of
the N4100. The login screen of the LAN device management interface should
display.
224
DESCRIPTION
This field displays the server port number of the LAN device.
This field displays the MAC address of the LAN device.
This field displays the type of application packet that is forwarded to the
LAN device.
This field displays to which interface on the N4100 the LAN device is
connected.
N4100 User's Guide