ZyXEL Communications N4100 User Manual page 169

Table 37 ADVANCED > SYSLOG
LABEL
Server
MAC
Address
Syslog Server
on WAN
Server 1 IP
Address
Server 2 IP
Address
Send to Email
Email Server
IP Address
or Domain
Name
SMTP Port
E-mail
(SMTP)
server
needs to
check my
account
Username
Password
Email From
Name
Email
Address
Email To
Email
Address
1,2
Apply
N4100 User's Guide
DESCRIPTION
Enter the MAC address of the syslog server on the LAN.
Select this check box to specify a syslog server on the WAN.
Enter the IP address of the first syslog server on the WAN in dotted
decimal notation.
Enter the IP address of the second syslog server on the WAN in dotted
decimal notation.
Select Enable to have the N4100 send syslog messages to the e-mail
account that you specify.
Select Disable to not have the N4100 send syslog e-mail messages.
Enter the IP address or domain name of the mail server for the e-mail
addresses specified below. If this field is left blank, the syslog will not be
sent via e-mail.
Enter the port number (25, or between 2500 and 2599) for the mail
server. The default is 25.
Select this check box if your SMTP server requires user name and
password authentication before accepting e-mail. Your network
administrator, SMTP server provider or ISP should supply the username
and password.
Enter the username for the SMTP server.
Enter the password for the SMTP server.
Type a name that you want to be in the "message from" field of the log e-
mail message that the N4100 sends.
Enter your e-mail address. This is the address others use to send e-mail
to Email Address 1/Email Address 2.
Enter your first and second e-mail addresses to which the N4100 is to
send the syslog e-mails. If you leave these fields blank, logs will not be
sent via e-mail.
Click Apply to save your changes back to the N4100.
Chapter 20 Syslog
169