ZyXEL Communications N4100 User Manual page 214

Chapter 28 System Status
Table 54 SYSTEM STATUS > SYSTEM (continued)
LABEL
WAN MAC
Address
LAN MAC
Address
WLAN MAC
Address
System Time
System Up
Time
LAN IP
IP Address
Subnet Mask
WAN IP
WAN Port
Mode
IP Address
Subnet Mask
Gateway IP
address
DNS
Primary DNS
Server
Secondary
DNS Server
DHCP
DHCP Status
Start IP
Address
End IP
Address
Lease Time
Wireless
ESSID
Channel
Encryption
E-mail
214
DESCRIPTION
This field displays the MAC address of the N4100 on the WAN.
This field displays the MAC address of the N4100 on the LAN.
This field displays the MAC address of the N4100 on the WLAN.
This field displays the N4100's current time.
This field displays the how long the N4100 has been operating since it
was last started.
This field displays the IP address of the LAN port on the N4100.
This field displays the subnet mask of the LAN port on the N4100.
This field displays the DHCP mode of the WAN port. It displays DHCP
Client, Static IP Setting, PPPoE or PPTP.
This field displays the IP address of the WAN port on the N4100.
This field displays the subnet mask of the WAN port on the N4100.
This field displays the IP address of the default gateway of the WAN port
on the N4100.
This field displays the IP address of the primary DNS server.
This field displays the IP address of the secondary DNS server.
This field displays the DHCP mode on the LAN.
This field displays the first of the continuous addresses in the IP address
pool.
This field displays the last of the continuous addresses in the IP address
pool.
This field displays the time period (in minutes between 1 and 71582788)
during which a DHCP client is allowed to use an assigned IP address.
When the lease time expires, the DHCP client is given a new, unused IP
address.
This field displays the N4100's Extended Service Set IDentity.
This field displays the channel that the N4100 is using.
This field displays the type of data encryption that the N4100 is using.
WEP displays if the N4100 is using WEP data encryption. WPA displays if
N4100 is using WPA data encryption. WPA2 displays if N4100 is using
WPA2 data encryption. Disable displays if the N4100 is not using data
encryption.
This field displays the IP address or the domain name of the SMTP server.
N4100 User's Guide