ZyXEL Communications N4100 User Manual page 196

Chapter 25 Wireless LAN
Table 48 ADVANCED > WIRELESS (continued)
LABEL
Authenticatio
n Port
Shared Secret
Key
WEP
Encryption
Mode
WEP Key 1 ... 4
196
DESCRIPTION
You need not change this value unless your network administrator
instructs you to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the N4100.
The key is not sent over the network. This key must be the same on
the external authentication server and the N4100.
Select 64-bit or 128-bit for the WEP key length.
Select the type of input mode from the drop-down list box. Choices are
HEX and ASCII.
Select ASCII to enter the WEP keys as ASCII characters.
Select HEX to enter the WEP keys as hexadecimal characters.
Enter the WEP keys in the fields provided and select a key as the
default key to use.
If you select 64 bit in the WEP Encryption field.
Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-
9" (for example 11AA22BB33) for HEX key type
or
Enter 5 printable ASCII characters (case sensitive) ranging from "a-z",
"A-Z" and "0-9" (for example MyKey) for ASCII key type.
If you select 128 bit in the WEP Encryption field,
Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-
9" (for example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 printable ASCII characters (case sensitive) ranging from "a-
z", "A-Z" and "0-9" (for example, MyKey12345678) for ASCII key type.
The values for the WEP keys must be set up exactly the same on all
wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
N4100 User's Guide