Ospf Virtual-Links - ZyXEL Communications Dimension XGS-4528F User Manual

Chapter 32 OSPF
Table 102 IP Application > OSPF Configuration > OSPF Interface (continued)
LABEL
Key ID
Cost
Priority
Delete
Cancel

32.7 OSPF Virtual-Links

Configure and view virtual link settings in this screen. See
285 for more information on OSPF.
In the OSPF Configuration screen, click Virtual-Link to display the screen as
shown next.
Figure 154 IP Application > OSPF Configuration > OSPF Virtual Link
The following table describes the related labels in this screen.
Table 103 IP Application > OSPF Configuration > OSPF Virtual Link
LABEL
Name
Area ID
Peer Router
ID
296
DESCRIPTION
When the Authentication field displays MD5, this field displays the
identification number of the key used.
This field displays the interface cost used for calculating the routing table.
This field displays the priority for this OSPF interface.
Click Delete to remove the selected entry from the summary table.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Enter a descriptive name (up to 32 printable ASCII characters) for
identification purposes.
Select the area ID (in an IP address format with dotted decimal notation)
of an area to associate the interface to that area.
Enter the ID of a peer border router.
Section 32.1 on page
XGS-4528F User's Guide