ZyXEL Communications IES-5000 Support Notes page 22

Zyxel ies-5000: user guide

Hide thumbs Also See for IES-5000:

Table of Contents

IES-5000 Support Notes

After the installation process is complete, start the daemon from the Start menu. A

screen displays as shown. In this example, assume that the syslog server's IP address

is 192.168.1.77.

2. IES-5000 settings

On the IES-5000, enable syslog logging and specify the IP address of the syslog

server (192.168.1.77 in this example). Specify where (Local 1 through Local 7) you

want to store the logs and then save the settings.

CI command:

TGE1> sys syslog enable

TGE1> sys syslog server 192.168.1.77

TGE1> sys syslog facility 1

TGE1> config save

When the DSL connection is up or down, the IES-5000 sends a log record to the

syslog server. You can see the new entry in the syslog server. The following shows an

example.

Table of Contents