ZyXEL Communications IES-5000 Support Notes page 10

IES-5000
SLC-1248G or
ALC-1248G
Ethernet Port
DSL Port 1
PVID =10
Priority =7
ATM QoS=CBR
0/33
Setting up Multiple PVCs
This section shows you how to configure settings on the devices for this application.
In this network application, we will use an IES-5000, a ZyXEL ES-2024
VLAN-aware switch and Prestige 660R-61 CPE (you may also use P791 if you have
the SLC-1248G line card installed on the IES).
1. IES-5000 Settings
1.1 VLAN setup
Follow the procedure as described in the VLAN Application section to configure the
VLAN settings on the IES-5000.
Create a VLAN with a VID of 10 and set Port 1 and ENET 1 to be members of this
VLAN. Also enable egress tagging on ENET 1.
TGE1> vlan name 10 VLAN10
TGE1> vlan set 10 up1 fix tag
TGE1> port pvc vlan 7-1-0/33 10 join untag
Create a VLAN with a VID of 20 and set Port 1 and ENET 1 to be members of this
All contents copyright (c) 2005 ZyXEL Communications Corporation.
802.1Q VLAN
Switch
Port 10
PVID =20
Priority =0
ATM QoS=UBR
1/34
CPE
IES-5000 Support Notes
Port 2
PVID=20
Internet Access
VLAN 20
Port 1
PVID=10
Video Server
Internet
VLAN 10
10