HP C5644A - SureStore Travan T4i Tape Drive User Manual page 25

Figure 2.7 SCSI cable connections
Terminator block
SCSI cable
3 Plug one of the computer's power cables into the back of the tape drive. (See
figure 2.8.)


Align the beveled edges of the computer's power connector with the beveled edges
of the drive's connector.


Insert it into the drive's power connector and press the connectors firmly together.
Figure 2.8 Connecting the power cable and SCSI cable
Align the plastic square
on the cable's connector
with the slot on the
drive's connector.
SCSI cable
Installing an Internal Tape Drive
Installing the Tape Drive in the Bay
Other internal
SCSI devices
Tape
drive
Connection to
SCSI controller
Power cable
2-9