HP C4405A - Colorado 14GB Tape Drive User Manual page 85

Note: Your printer port may not appear in this list. If it does not appear,
change your printer port IRQ setting using the steps in the next
section.
5. Restart your computer and rerun HP Colorado Backup II.
To change your printer port IRQ setting to 07:
1. Right-click the My Computer icon and select Properties.
2. Click the Device Manager tab in the System Properties window.
3. Double-click Ports in the list box, select Printer Port (LPT1), then click
Properties.
4. Click the Resources tab, then write down your current Input/Output Range
settings.
5. Uncheck Automatic Settings and select Basic Configuration 1 in the Setting
based on drop-down list box.
Interrupt Request appears in the list box.
6. Highlight Interrupt Request and click Change Setting.
7. Select 07 for the new interrupt.
8. Click OK and verify that the Input/Output Range is at the setting you wrote
down.
9. Click OK, then restart your computer.
If the problem persists:
Remove any conflicting drivers or programs. See
from Other Backup Programs on page
Some drives may be incompatible with enhanced parallel ports (ECP/EPP).
Check with your computer hardware vendor to confirm the kind of parallel
port you have and to learn how to change the setting from ECP or EPP to a
compatible setting, such as bi-directional.
Backup Device Configuration
Conflicts With Drivers
81.
85