HP C1593B - SureStore DAT Tape 5000e Drive Installation Manual page 19

HP SureStore DAT
Installing an "e" Model Drive (external)
NetWare. This software also provides full support for HP One-Button
Disaster Recovery, which allows complete system recovery at the touch of
a button using only the latest backup cartridge.
Note Not all system configurations and backup software are capable of
supporting HP One-Button Disaster Recovery.
• If you are installing the drive on a standalone PC or a client PC that
• If you are installing the drive on a PC that runs Windows NT Server or
• The tape drive must be installed before installing the software.
For the latest list of backup packages that support HP SureStore DAT
drives and advanced features such as HP One-Button Disaster Recovery
and TapeAlert, refer to our World Wide Web site (http://www.hp.com/
go/connect). The Selection section of this web site lists backup software
solutions suitable for your tape drive model and operating system
(including Microsoft Windows, Novell NetWare, IBM OS/2, various UNIX
systems, and Apple Macintosh).
Note Once you have installed your backup software, remember to carry out a
trial backup and restore.
User Documentation
For more information about using your DAT drive, refer to the "User
Documentation" topic on the HP SureStore Tape CD-ROM. This provides
links to frequently asked questions about drivers and operating systems,
and, from the "DAT Drive Documentation" link, to three electronic User's
Guides:
• HP SureStore DAT User's Guide
• HP One-Button Disaster Recovery Guide
• Media and Orderable Accessories Guide
Refer to your backup application's documentation for instructions on how
to back up and restore data.
1-14
runs Windows 95/98, you can use the HP Colorado Backup II software.
Novell Netware, you can use Replica Single Server for HP SureStore
Tape. If using Replica with NetWare, please see the README file on the
HP SureStore Tape CD-ROM. Replica is not supported on NetWare 5.0.