Changing the Settings Menu
Step 4
Step 5
Changing the Ring Type Setting
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco Unified IP Conference Station 7936 Administration Guide
3-28
Press the On or Off softkey to turn the backlight on or off on the LCD screen.
Press the Exit button to exit this menu.
To change the ring type setting on the Cisco Unified IP Conference Station,
follow these steps:
Procedure
Press the Menu button.
Select Settings and then press the Select button.
Press the Up or Down scroll button to select Ringer.
Press the Change softkey.
Press the Up or Down scroll button to select a ring type entry, and then press the
Listen softkey to hear your selection.
There are five ringer sounds. You can also shut off the ringer sound, in which case
Ring Off would display on the LCD screen. The default ringer is Pro Ring.
If you want to select a different ringer type, repeat
Press the Save softkey to save the ringer type.
Press the Exit button to exit this menu.
Chapter 3
Configuring the Cisco Unified IP Conference Station 7936
Step
5.
OL-10751-01