Verifying Firmware Version Information - Cisco 7936 - IP Conference Station VoIP Phone Administration Manual

For cisco unified callmanager 5.0
Hide thumbs Also See for 7936 - IP Conference Station VoIP Phone:
Table of Contents

Advertisement

Verifying Firmware Version Information

Step 7
Step 8

Verifying Firmware Version Information

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco Unified IP Conference Station 7936 Administration Guide
3-18
In the HTTP Port field, enter a new HTTP port number.
The default value is 80. You can enter any number. Users will have to use
Note
this number suffixed to the IP address of the Cisco Unified IP Conference
Station when they access the web interface.
Press the Save softkey to save your changes.
You can obtain information about the firmware version installed on the
Cisco Unified IP Conference Station.
To verify the firmware version on an Cisco Unified IP Conference Station, follow
these steps:
Procedure
Press the Menu button.
Press the Up or Down scroll button to select the Admin Setup menu.
Press the Select button.
Enter the administrator password. (The default administrator password is **#.)
Press the Enter softkey.
Press the Up or Down scroll button to select System Information.
Press the Select button.
Chapter 3
Configuring the Cisco Unified IP Conference Station 7936
OL-10751-01

Advertisement

Table of Contents
loading

Table of Contents