Cisco 7936 - IP Conference Station VoIP Phone Administration Manual page 35

Chapter 2 Setting Up the Cisco Unified IP Conference Station 7936
Enter the required fields as described in the following table.
Step 4
Field
MAC Address
Device Pool
Phone Button
Template
At the top of the page, click Insert.
Step 5
Add a directory number to this Cisco Unified IP Conference Station.
Step 6
If you need instructions, refer to the "Directory Number Configuration Settings"
topic in the Cisco Unified CallManager Administration online help.
Step 7 Reset the Cisco Unified IP Conference Station to apply the new settings.
OL-10751-01
Description
Enter the Media Access Control (MAC) address that
identifies the Cisco Unified IP Conference Station 7936.
The value contains 12 hexadecimal characters.
The MAC address is located on the bottom of the
Cisco Unified IP Conference Station.
You can also display the MAC address when the
Cisco Unified IP Conference Station is powered on by
pressing the Menu button and navigating to the Admin
Setup menu. Press Select, enter the administrator
password (the default is **#), and press the Enter
softkey. Select System Info and scroll through the system
information to find the MAC address.
Choose the device pool to which you want this
Cisco Unified IP Conference Station assigned. The
device pool defines sets of common characteristics for
devices, such as region, date/time group,
Cisco Unified CallManager group, and calling search
space for auto-registration.
The value you choose overrides the default value for this
type of device.
Choose the appropriate phone button template. The
phone button template determines the configuration of
buttons on a phone and identifies which feature (line,
speed dial, and so on) is used for each button.
Cisco Unified IP Conference Station 7936 Administration Guide
Preparing to Install
2-3