Using The Diagnostics Menu - Cisco 7936 - IP Conference Station VoIP Phone Administration Manual

Using the Diagnostics Menu

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7

Using the Diagnostics Menu

Cisco Unified IP Conference Station 7936 Administration Guide
3-26
Procedure
Press the Menu button.
Press the Up or Down scroll button to select the Admin Setup menu.
Press the Select button.
Enter the administrator password. (The default administrator password is **#.)
Press the Enter softkey.
Press the Up or Down scroll button to select Change Passcode and then press the
Select button.
Use the dialing pad to enter the new password in the Passcode field.
a.
Use the < softkey to correct any mistakes.
Re-enter the new password in the Confirm field.
b.
Press the Save softkey to save the new password, or press the Cancel softkey to
exit without saving.
You can use the Diagnostics menu to view network statistics on the
Cisco Unified IP Conference Station and to ping another device's IP address.
For detailed information about viewing network statistics on the
Cisco Unified IP Conference Station, see the
section on page 4-1.
For detailed information about using the Diagnostics menu to ping another device
from the Cisco Unified IP Conference Station, see the
page 4-2.
See Chapter 4, "Troubleshooting the Cisco Unified IP Conference Station 7936"
for additional troubleshooting information.
Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
"Viewing Network Statistics"
"Using Ping" section on
OL-10751-01