Unlocking and locking
Key
Fig. 30 Set of keys without remote control / set of keys with remote control key
Two keys are provided with the vehicle. Depending on the equipment, your vehicle can
be equipped with keys without radio remote control or with radio remote control keys*
⇒ fig.
30.
WARNING
•
Always withdraw the key whenever you leave the vehicle - even if it is only
for a short time. This is particularly important if children are left in the vehicle.
The children might otherwise start the engine or operate electrical equipment
(e.g. power windows) - risk of injury!
•
Do not withdraw the ignition key from the ignition lock until the vehicle has
come to a stop. The steering lock might otherwise engage unintentionally - risk
of accident!
Caution
•
Each key contains electronic components; therefore protect them against moisture
and severe shocks.
•
Keep the groove of the keys absolutely clean as impurities (textile fibres, dust etc.)
have a negative effect on the proper operation of the locking cylinder and the ignition
lock.
Using the system
Safety
Please approach a specialist garage if you lose a key since he can obtain a new one for
you.
Changing the battery of the radio remote control
Fig. 31 Remote control key - remove cover / remove battery
Each remote control key contains a battery which is housed under the cover
⇒ fig.
pressing a button on the remote control
– Fold open the key.
– Carefully press off the cover at the points of the arrows
– Remove the discharged battery from the key by pressing the battery downwards at
– Insert the new battery. Ensure that the "+" symbol on the battery is facing upwards.
– Position the battery cover on the key and press on it until it is heard to lock in place.
Dispose of an old battery in accordance with environmental regulations.
Driving Tips
General Maintenance
Note
31. If the battery is discharged, the red indicator light
A
⇒ fig.
the point of the arrow
31.
2
The correct polarity is shown on the battery cover.
For the sake of the environment
Breakdown assistance
Unlocking and locking
A
A
does not light up after
A
⇒ fig.
30. Change the battery as follows:
A
.
1
Technical Data
39
B