Windshield Wiper And Wash System - Skoda YETI - 05-2010 Owner's Manual

Table of Contents

Advertisement

Windshield wiper and wash system

Windshield wiper
You can operate the windscreen wipers and automatic wipe/wash
using the windscreen wiper lever.
 fig. 50
The windscreen wiper lever
Finger-operated wiping
– If you wish to wipe the windscreen only briefly, push the lever into the sprung
A
position
. If you hold the lever in the lower position for more than 1 second, the
4
wiper wipes faster.
Intermittent wiping
– Position the lever up into position
A
– Set with the switch
the desired break between the individual wiper strokes
A
Slow wipe
– Position the lever up into position
Fast wipe
– Position the lever up into position
Using the system
Safety
Fig. 50 Windscreen wiper lever
has the following positions:
A
.
1
A
.
2
A
.
3
Driving Tips
Automatic wipe/wash for windscreen
– Pull the lever towards the steering wheel into sprung position
sprays immediately, the windscreen wiper starts wiping a little later. The wash
system and the windscreen wiper operate simultaneously at a speed of more than
120 km/h.
– Release the lever. The windscreen wash system stops and the wiper continues for
another 3 - 4 wiper strokes (depending on the period of spraying of the wind-
screen). At a speed of more than 2 km/h, the wiper wipes once again* 5 seconds
after the last wiper stroke in order to wipe the last drops from the windscreen. This
function can be activated/deactivated by a specialist garage.
Rain sensor*
A
– Move the lever into position
1
– You can set the sensitivity of the sensor individually with switch
Wiping the rear window pane
– Push the lever away from the steering wheel into position
wiper will operate every 6 seconds.
Automatic wipe/wash for the rear window pane*
– Press the lever from the steering wheel forward into the sprung position
wash system sprays immediately, the windscreen wiper starts wiping a little later.
As long as you hold the lever in this position, the wiper operates as well as the wash
system.
– Letting go of the lever will cause the windscreen wash system to stop and the wiper
to continue for another 2 - 3 wiper strokes (depending on the period of spraying of
the windscreen). The lever will stay in position after releasing it
Switching windscreen wipers off
– Move the lever back into its home position
After the windscreen wiper switches off each time or the ignition switches off for the
third time, the position of the windscreen wiper changes, this counteracts an early
fatigue of the wiper rubbers. After starting the vehicle, the front window wipers auto-
matically move into the lower rest position.
General Maintenance
Breakdown assistance
Lights and Visibility
A
, the wash system
5
.
A
.
A
A
- the widescreen
6
A
6
A
.
0
Technical Data
63
A
, the
7
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yeti

Table of Contents