Digital Clock; Multi-Functional Indicator (Onboard Computer) - Skoda FABIA Owner's Manual

Digital clock

A reset button is installed on the left below beside the speedometer for
⇒ page 15, fig.
adjusting the clock
Set hours
– Turn the reset button to the left.
Setting minutes
– Turn the reset button to the right.
WARNING
The clock should not be adjusted while driving for safety reasons but only
when the vehicle is stationary.

Multi-functional indicator (onboard computer)*

Introduction
The multi-functional indicator appears in the display
⇒ page 22, fig. 24
display depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information.
The outside temperature
Range
Current fuel consumption
Average fuel consumption
Driving time
Distance driven
Average speed
Using the system Safety
18.
⇒ fig. 21
or in the information
⇒ page 21
⇒ page 21
⇒ page 21
⇒ page 21
⇒ page 22
⇒ page 22
⇒ page 22
Driving Tips
Instruments and Indicator/Warning Lights
Note
In certain national versions the displays appear in the Imperial system of
measures.
Memory
The multi-functional indicator is equipped with two automatic memories. The
selected memory is displayed in the middle of the display field
The data of the single-trip memory (memory 1) is shown if a 1 appears in the
display. A 2 shown in the display means that data relates to the total distance
memory (memory 2).
Switching of the memory takes place when the button
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the igni-
tion is switched on until it is switched off. New data will also flow into the calcula-
tion of the current driving information if the trip is continued within 2 hours after
switching off the ignition. The memory will be is automatically erased, on the other
hand, if the trip is interrupted for more than 2 hours.
General Maintenance Breakdown assistance
19
Fig. 21 Instrument cluster:
Multi-functional indicator
⇒ fig.
21.
A ⇒ page 20, fig.
22.
B
Technical Data