Phone Voice Phonebook - Skoda FABIA Owner's Manual

After giving this command, the last number selected via voice input is selected
again.
Example of redial
Voice command
REDIAL
You can interrupt the dialogue at any time by pressing the PTT button or with the
voice command CANCEL.

Phone voice phonebook*

Store name
– Press the PTT button.
– Give the command SAVE/STORE NAMES/NAME/NUMBER after the
signal tone.
After giving this command, the system requests the entry of a name and a tele-
phone number which should be stored in the phone voice phonebook. In the
phone voice phonebook up to 50 entries can be stored.
The telephone number can be entered as an interconnected spoken row of digits
(complete number), in the form of order of digits (separation through a brief voice
pause) or through individually spoken digits. After each order of digits (separation
through brief voice pause) the detected digits are repeated.
The digits zero to nine are permitted. The system detects no continuous digit
combinations such as twenty-three, but only individually spoken digits (two, three).
If you enter more than 20 digits, the system announces: "The number is too long".
Additionally a Plus (+) has to be entered in front of the 20 digits.
The stored entry is displayed in the information display* with an arrow in front of
the name.
For similar names additional information (e.g. first names) should be stored.
Using the system Safety
Announcement
"The number is being dialed"
Driving Tips
Example for storing in the phone voice phonebook
Voice command Announcement
SAVE/STORE
"The name please"
NAMES/NAME/NUMBER
COMPANY XYZ "Please repeat the name"
COMPANY XYZ "The number please"
ZERO ONE TWO THREE "Zero One Two Three"
FOUR FIVE SIX "Four Five Six"
If no entry is put in, the following announcement is made after about 5 seconds.
"Possible commands are: store, repeat, back,
delete or more digits"
STORE "The name COMPANY XYZ is stored"
You can interrupt the dialogue at any time by pressing the PTT button or with the
voice command CANCEL.
Select name
– Press the PTT button.
– Give the command DIAL/SELECT NAMES/NAME after the signal
tone.
After giving this command, there is the possibility to select a stored entry out of the
phone voice phonebook.
General Maintenance Breakdown assistance
Communication 119
Technical Data