Digital Clock - Skoda FABIA - 05-2007 Manual

12 Instruments and Indicator/Warning Lights
Service Interval Display
⇒ page 11, fig. 5
A key symbol appears in the counter display for distance driven
about 30 days before reaching the due date for the service. The remaining distance
to be driven will be indicated for 10 seconds next to the key symbol and then the
remaining number of days to the due date for the service inspection.
The following will be displayed in the information display*:
SERVICE DUE IN ... KM OR ... DAYS
The kilometre indicator or the days indicator reduces in steps of 100 km. or days
until the service due date is reached.
The text INSP appears as a flashing key symbol and as soon as the due date for the
service is reached.
The following will be displayed in the information display*:
SERVICE NOW
The display disappears within 20 seconds after switching on the ignition. The trip
counter is also displayed after pressing the reset button of the trip counter for
distance driven (for more than 1 second).
Resetting Service Interval Display
We recommend having this resetting performed by a specialist garage.
The specialist garage:
•
resets the memory of the display after the appropriate inspection,
•
makes an entry in the Service schedule,
•
affix the sticker with the entry of the following service interval to the side of the
dash panel on the driver's side.
It is also possible for you to reset the Service Interval Display with the reset button
A ⇒ page 11, fig. 4
as follows:
A
•
A ⇒ page 11, fig. 4
Press the reset button
A
and hold it down.
•
Switch the ignition on, release the reset button
to the right. All counters will be reset to 0.
with the ignition switched off and
A
and and turn the reset button
A
It is only possible to reset the Service Interval Display, if a service message or at least
a pre-warning is shown on the display of the instrument cluster.
Caution
We recommend that you do not reset the Service Interval Display yourself other-
wise this can result in the service interval display being incorrectly set, which may
also result in problems with operation of your vehicle.
Note
•
Never reset the display between service intervals otherwise this may result in
incorrect readouts.
•
information is retained in the Service Interval Display also after the battery of
the vehicle is disconnected.
•
it is necessary to re-code the Service Interval Display if a new instrument cluster
is installed during repair work. This work is carried out by a specialist garage.
•
Please refer to the brochure Service schedule for extensive information about
the service intervals.

Digital clock

A reset button is installed on the left below beside the speedometer for
⇒ page 9, fig.
adjusting the clock
Set hours
– Turn the reset button to the left.
Setting minutes
– Turn the reset button to the right.
2.