Middle Rear Head Restraint - Skoda FABIA - 05-2007 Manual

Adjusting the angle of a head restraint*
– The head restraint can be matched to the head of the occupant by
adjusting the angle in the direction of the arrow
Adjusting the angle of the head restraint provides enhanced comfort
for the user.
Removing and installing a head restraint
– Pull the head restraint up out of the backrest of the seat as far as the
stop (on the rear head restraints fold forward the seat backrest).
– Press the locking button in the direction of arrow
the head restraint out.
– To re-insert the head restraint, push it down into the backrest of the
seat far enough until you hear the locking button engage.
The head restraints of the front seats can be adjusted for height and angle*. The
outer head restraints are adjustable for height. The middle rear head restraint* is
adjustable in two positions ⇒ page 55.
The head restraints must be adjusted to match the size of the seat occupant.
Correctly adjusted head restraints together with the seat belts offer effective
protection for the occupants ⇒ page 100.
You must always press the securing button
tilting head restraints* out of the upper setting into the lower setting.
WARNING
•
The head restraints must be correctly adjusted in order to offer effective
protection for the occupants in the event of an accident.
•
Do not drive under any circumstance with removed head restraints - risk
of injury!
Using the system Safety
A ⇒ fig.
47.
B
⇒ fig. 48
and pull
⇒ page 54, fig. 48
when pushing the
Driving Tips

Middle rear head restraint*

The middle head restraints can be adjusted to two settings, the upper one and the
lower one. The upper setting is interlocked into place.
You must always press the securing button
restraint and when pushing it out of the upper setting into the lower setting.
WARNING
The head restraint on the middle rear seat must always be in the upper
locked position when someone is sitting there.
General Maintenance Breakdown assistance
Seats and Stowage
Fig. 49 Rear seats: the
position of the middle
head restraints
⇒ fig. 49
when removing the head
Technical Data
55