Rds Operation - Skoda CAR RADIO RHAPSODY - FOR SUPERB 08-2003 Manual

RDS operation

First of all RDS (Radio Data System), makes it
possible to show the name of the station being
received in the display - „NDR 2", for example.
Previously, for stations broadcasting on several
frequencies, you had to manually tune the radio
to station frequency with best reception as you
travelled from one area to the next. This was
frequently necessary when reception conditions
were poor.
RDS now automatically selects the best fre-
quency from a list of alternative frequencies and
tunes the radio to it. This process is inaudible!
This ensures you the best possible reception
in a transmitting range even under unfavourable
reception conditions.
Local stations
German broadcasting companies broadcast
some programmes that vary from one region
to the next.
Programme 1 of ffn in Brunswick (display: „ffn
- BS") for instance, transmits different regional
programmes to Hanover (display: „ffn - H") and
Kassel (display: „ffn - KS").
The radio first tries to collect only alternative fre-
quencies for the selected station.
However, if the quality become so bad that re-
ception becomes intermittent, the radio will also
accept frequencies of a „related" ffn station. As
such stations broadcast different programmes
from time to time, such a change in frequency
can also result in a different programme being
heard.
The RDS system is programmed to prioritise
regional stations with the same content.
General notes on RDS reception
l Depending on the strength of the signals re-
ceived, it may take the radio up to several minutes
to evaluate the RDS data.
l RDS always selects the most favourable fre-
quency from a list of alternative frequencies. If
none of the alternatives provides a clear signal,
you will, of course, also hear interference in RDS
mode!
l It is not possible to evaluate RDS data when
the signal received is too weak. In this case the
frequency will remain in the display.
l The running text will not be shown if the option
„FIX" in the set-up menu RDS Name is selected
and the text which appeared at the announcement
time - see page 9.
CONTROLS AND EQUIPMENT
Storing RDS stations
When storing RDS stations, the appropriate sta-
tion button should not be pressed until the station
name appears in the display. This ensures that all
RDS information has been evaluated and, where
appropriate, automatically stored.
When selecting stored RDS stations, the
respective station name appears. If the stored
frequency is not available, the radio automatically
selects a suitable alternative frequency (Best sta-
tion function).
if none of the stored alternative frequencies are
available, the desired station cannot be received.
A different station should be selected.
Note
Please ensure that the name of the station is
shown in the display when storing. Otherwise
any running text being displayed, and not the
station name, will be stored!
17