Table of Contents
Advertisement
4
General information
– If the correct code number is displayed in the entry line, press
Code number
The code number can only be called up "online" via the Škoda system, as this guar-
antees even more effective anti-theft protection. Please contact your Škoda Service
Partner if necessary.
Incorrect code number
If an incorrect code is confirmed after entry of the code, the procedure can be
repeated once again. The number of attempts is shown in the second display line.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. It is possible to enter again the safety code after one
hour has expired, when the unit and the ignition have been switched on.
If two invalid attempts are then made again, the navigation system will be blocked
again for an hour.
The cycle - two attempts, blocked for an hour - will continue to apply.
Note
The code is normally stored in the instrument cluster. This ensures that it is auto-
matically decoded (convenience coding). Manual input of the code is normally not
necessary.
General - operation
The screen of the unit is a so-called touch screen (touch-screen). Fields
circled in colour on the touch-screen are presently "active" and are oper-
ated by touching the screen.
"Function keys" on the screen
– Active fields on the touch-screen, which call up a function or a menu,
are called "function keys".
OK
.
– By using the function key
the previous menu.
Moving objects or regulators
– Place your finger on the display of a moving object on the touch-
screen, for example the "sliding regulator" in a "scrollbar".
– Now move your finger over the touch-screen without interruption.
The object will follow your movements, but can only be moved within
the pre-defined range.
– Lift the finger from the touch-screen at the desired position.
– To view the displayed menu section, move the right sliding regulator
in the scrollbar completely to the bottom.
– Alternatively, you can move the sliding regulator on the touch-screen
to the bottom and top by touching the function keys
– A sliding regulator in a set-up bar
pressing
-
or
+
"Scrollbar"
The vertical bar on the right side of the display with a sliding regulator between the
arrow keys
and
is called a "scroll bar". It indicates that further menu entries
become visible if the sliding regulator is moved completely to the bottom.
Display settings
In a set-up menu a set-up or value is infinitely adjustable. Move the sliding regu-
lator
or press
+
or
over a changed setting and to switch back to the initial menu.
"Pop-up window"
A function key with an arrow
selected set-up, e.°g. with an
If you press on the function key
open where all the set-up options are displayed.
you can change back from each menu to
can alternatively be moved by
-
to change a setting. Press the function key
behind another function key shows the presently
.
Confirmation tone Off
on the display, a so-called "pop-up window" will
and
.
, to take
Hide quick links:
Advertisement
Table of Contents
