Table of Contents
Advertisement
If two invalid attempts are then made again, the unit will be blocked again for an
hour.
The cycle - two attempts, blocked for an hour - will continue to apply.
Note
The code is normally stored in the instrument cluster. This ensures that it is auto-
matically decoded (convenience coding). Manual input of the code is normally not
necessary.
Device specification and operation
Equipment overview
Fig. 1 Equipment overview
- On/off knob
1
›
for switching the equipment on and off (press)
›
for volume adjustment of audio source currently being played (turn)
2
Settings knob
›
for activating the Scan function
›
for settings in the individual modes
- Radio operation
3
RADIO
- MEDIA operation
4
MEDIA
- switches traffic programme on/off
5
TP
- Setting of the special functions
6
MENU
and
- buttons for moving forwards/backwards
7
›
RADIO-Mode - for the selection of the stations from the preset list.
›
MEDIA-Mode - for the selection of the previous or following track.
›
MENU-Mode - for setting the setpoints of special functions
CD case
8
9
- Eject a CD
- Sound settings
10
Function keys
11
›
Save and select radio stations
›
Enter code
AUX input - Attach an external audio source
12
Switching the unit on and off
›
To switch the device on and off, press setting button
After switching on the unit, the last audio source that was active before switch-
ing off will be played.
If the device is switched on and the ignition key is removed, the unit switches off
automatically.
If your vehicle is fitted with the KESSY system, the unit will switch off automati-
cally after the engine is turned off and the door opened. If the door is opened be-
fore turning off the engine, the unit will not switch off until the vehicle has been
locked.
When the ignition is switched off, the system switches off automatically after ap-
prox. half an hour (discharge protection of the vehicle battery).
Volume setting
›
To increase the volume, turn button
›
To decrease the volume, turn button
The change to the volume appears in the unit display.
If the volume is reduced to 0, the speakers are muted. The following symbol will
appear in the display .
.
1
clockwise.
1
counter-clockwise.
1
General information
3
Advertisement
Table of Contents
