Basic Setting; Switching The Unit On And Off; Audio Settings; Radio Selector Key - Skoda CAR RADIO BOLERO - FOR OCTAVIA Manual

6

Basic setting

Basic setting

Switching the unit on and off

– The system is switched on or off by pressing the control button
The last active audio source before switching off is repeated.
If the key is pulled out of the ignition lock while the unit is switched on, the unit will
switch off automatically. You can then switch the unit on again. If the ignition is
switched off, the unit (discharge protection of the vehicle battery) switches off auto-
matically after approx. one hour. This process can be repeated as often as
necessary.

Audio settings

By pressing the button you can select the following parameters:

•
- Setting of height, middle and depth;
Treble-Mid-Bass
•
- Volume ratio (left and right = balance), (front and rear = fader);
Balance fader
•
Volume - Startup volume , Traffic announcements
volume, traffic announcements and volume of park distance control signal;
•
- Speed dependent volume adaptation;
GALA
•
- Switching on or off the tone signal when storing the radio
Confirmation tone
stations.
Reducing the volume when activating the parking aid (PDC)*
If your vehicle is equipped with "parking aid", the volume is automatically
decreased to a pre-defined value, when the "parking aid" is active.
GALA function
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.

RADIO selector key

A Selecting a radio station
.
1
Call up main Setup RADIO and choose frequency range
– Press the range selector key
– To change the frequency range, press the button
Changing radio station
– By pressing the arrow keys on the display of the RADIO main Setup,
Selecting a radio station from the station list
– Press the function key
and PDC * - Switch on
– Choose the desired station by pressing the respective selection. After
Function keys in the Radio main Setup
1...
Band
Station list
Memory
RADIO
The currently heard radio station is indicated at the top of the display.
tion key and on or
Band FM AM
current frequency range is indicated at the top left of the display.
you can change to the previous or the following station.
Station list
currently be received. The list "skips" directly to the display of the
currently heard radio station.
about 20 seconds without operation the image of the station list will
close automatically.
to - Station keys for storing or calling up a stored radio station.
...42
- Button for selecting the desired frequency range.
- opens the list of the presently receivable radio stations.
- opens the list of the stored radio stations.
to call up the RADIO main Setup.
or the func-
RADIO
in the opening pop-up window. The
to display all radio stations that can