Range Selector Key Setup - Skoda CAR RADIO BOLERO - FOR OCTAVIA Manual

14 Basic setting
•
If an external audio source is connected via AUX-IN, which is equipped with an
adapter for external power supply, it can occur that the audio signal is interrupted.
This depends on the quality of the adapter which is used.
•
The loudspeakers in the vehicle are matched to a power output of the radio of
4x20 W.
•
For the equipment sound system*, the loudspeakers are matched to a power
output of the amplifier of 4x40°W + 6x20 W.

Range selector key SETUP

Main Setup set-ups (Setup)
– Press the range selector key
– Select the area for which you wish to change the set-ups or carry out
set-ups by pressing on your selection.
– Press on the function key
Overview of the set-up Setups
- When in the radio mode, carry out set-ups for the function of the arrow
Radio
keys, for the displayed memory keys, the memory list and the traffic reports.
- Determine the set-ups for the play and display of MP3 data and activate
Media
or deactivate the external audio sources.
- Change the system set-ups such as voice response and time and cancel
System
or delete stored set-ups in individual areas.
- Select preferred TMC station and determine the area for TMC
Traffic program
announcements.
- Adjust the brightness of the screen and select/deselect the confirmation
Display
tone for the keystroke.
Phone - Update the phone book in the unit, delete all call lists and modify the
assignment of the shortcut keys.
to open the main Setup Setups.
SETUP
, to switch back to the last selected Setup.

Setup Radio
Call up the Setup Setup Radio by pressing the selector key
function key . Press on the function key
Radio
tion key Memory list to determine from which list in the radio mode the
stations are to be selected with the arrow keys. If the
selected, only stored stations from the memory list are called up.
"Memory" is displayed at the top left in the main Setup RADIO.
Select station keys for display
– Press on the function key behind the function key
Setup Setup Radio.
– In the pop-up window, press and select the station keys to be
displayed in the main Setup RADIO.
Switching the RDS function on or off (RDS regional)
– Press on the function key RDS regional
opening pop-up window.
– Press on the function key
Automatic
frequency for the radio station heard, which offers the best reception
at the present time.
– When pressing on the function key
radio station emitting regionally long enough until the reception
quality is so bad, that there is a risk of a program loss.
Delete memory list
– In the Setup Setup Radio move the sliding regulator to the bottom to
display the function key
Delete memory list
– Press the function key
Delete memory list
safety interrogation in order to erase all radio stations stored in the
memory list.
and the
SETUP
or on the func-
Station list
is
Memory list
in the
Station keys
and select a set-up in the
, doing so will always choose the
, the unit attempts to hold a
Fix
.
and confirm the following