Anti-Theft Protection; Basic Setting - Skoda DANCE Quick Start Manual

Hide thumbs Also See for DANCE:
Table of Contents

Advertisement

WARNING
Please always pay full attention to the traffic situation around you! As the
driver you are fully responsible for the traffic safety. Only use the functions
in such a way that you always maintain the control over your vehicle in all
traffic situations!
Using the display
Carefully handle the display because dents and scratches can occur through pres-
sure of the finger or contact with sharp objects.
The display can be cleaned with a soft cloth and finger marks can be wiped away
with pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display
surface.

Anti-theft protection

Anti-theft coding
Your radio is equipped with a convenience coding. If the radio is being operated for
the first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the battery, first of all switch on the ignition
and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered.
In this case, please do not hesitate to contact a Škoda Service Partner or a Škoda
importer.
As the unit only functions after entering the safety code, this practically excludes its
use after a theft - a contribution to increased anti-theft safety.
Ofrecido por www.electromanuales.com
Note
The code is stored in the instrument cluster. Through this it is automatically
decoded (convenience coding). A manual entry of the code is normally not
necessary.
Code entry
– Switch on the radio if the ignition is on. SAFE is displayed and then
0000.
– Enter the safety code using the station keys
– Confirm the safety code by pressing the button
If you have confirmed a wrongly entered code, you can repeat once again the entire
process.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. It is only possible to repeat the entry of the safety
code after an hour has expired and while the unit is switched on and the ignition
key remains in the ignition lock.
The cycle - two attempts, blocked for an hour - furthermore applies.

Basic setting

Switching the unit on and off
– The system is switched on or off by pressing the rotary/push knob
If the key is pulled out of the ignition lock when the system is switched on, the
system switches off automatically. You can switch on again the unit by pressing the
A
rotary/push knob
. If the engine is switched off, the unit (protection of the vehicle
1
battery before discharging) switches off automatically after approx. one hour.
Radio
3
A
.
12
.
A
.
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents