Skoda CAR RADIO BOLERO - FOR OCTAVIA Manual page 9

- Button for calling up the automatic play
Extras
in .
Radio Text
- activates manual station finding.
Man.
The process of searching for and storing the radio stations
Manual search
A
– Turn the Set button in the RADIO main Setup or press on the func-
2
tion key . The scale of the selected frequency range is inserted in
Man.
the frequency band in the lower part of the display.
– Briefly press the set button to terminate the manual frequency selec-
tion and to display once again the function keys.
Storing a radio station on a displayed station key
– Continue to press one of the six station keys
the RADIO main Setup until a signal tone sounds. The currently heard
radio station is then stored on this station key.
Deleting a radio station from the memory list
– In the RADIO main Setup, press the function key
memory list.
– Press the function key
Delete
– Confirm the following safety interrogation by pressing the function
key Delete to finally remove the station from the memory list.
If the currently heard radio station is already stored in the memory list, the memory
space number is displayed behind the description of the frequency range (FM or
AM).
Use the Setup Radio main Setup, to determine which of the six station keys are to
be displayed in the main Setup RADIO.
or for the radio text to fade
Scan
1 ... to 6 ... displayed in
to open the
Memory
behind the station you wish to delete.
Function SCAN
The stations of a waveband can be played briefly one after the other (for
ten seconds).
A
– Press the set button , the radio searches automatically all available
2
stations of the current waveband.
– Alternatively, press the function key
opening pop-up window.
– During the current automatic play the function key will change from
to .
Extras  Scan
A
– Press the set button or function key
2
matic play of the currently heard radio station.
RDS functions
Switching radio text on and off
– In the RADIO main Setup, press on the function key
in the opening pop-up window. Instead of the six station
Radio Text
keys, the window for displaying the radio text is now opened in the
lower half of the display.
– The window for displaying the radio text must fade out again to enable
the station keys to be displayed again. Briefly press on the display
window of the radio text.
– Alternatively, press the function key
shown as highlighted in the opening pop-up window.
Radio Text
RDS ("Radio Data System") serves to transmit program identification and additional
services therefore also enabling automatic tracking of stations.
In the event of sufficiently satisfactory reception, the suitable RDS radio stations will
display the station name instead of the station frequency.
Basic setting
and press in the
Extras Scan
again to end the auto-
 Scan
and on
Extras
and the function key
Extras
7