Setup - Skoda Bolero Operating Instructions Manual

Conditions for proper connection
›
Only USB devices with the specification 2.0 can be connected.
›
The version of the file allocation table FAT (File Allocation Table) of the connec-
ted device must be FAT16 ( <2 GB) or FAT32 (> 2 GB).
›
In order to replay from a unit with a hard disk (HDD) which includes a large data
volume, it can lead to a time delay when reading in the overview of the music
data.
›
In order to replay from a unit, which includes a complicated folder structure, it
can lead to a time delay when reading in the overview of the music data.
›
The folder structure in the connected unit must not exceed a depth of 8 levels.
One folder must not contain more than 1000 data.
›
A USB extension cable or USB distributor (HUB) must not be used to connect
the unit.
WARNING
On no account place an external audio source on the dash panel. You could
■
make sudden manoeuvres in the passenger compartment and injure the occu-
pants.
On no account place an external audio source close to the airbags. It could
■
be thrown into the passenger compartment when the airbags are deployed,
injuring the occupants.
Während der Fahrt darf die externe Audioquelle nicht in der Hand oder auf
■
den Knien gehalten werden. You could make sudden manoeuvres in the pas-
senger compartment and injure the occupants.
Always guide the connection cable of the external audio source in such a
■
way that is does not restrict you when driving.
CAUTION
The AUX socket must only be used for audio sources!
Note
The external audio source, which is connected via AUX, can only be used if
■
no unit is connected via MDI at the same time.
If an external audio source is connected via AUX, which is equipped with an
■
adapter for external power supply, it can occur that the audio signal is interrup-
ted. This depends on the quality of the adapter which is used.
The loudspeakers in the vehicle are matched to a power output of the radio of
■
4x20 W.
For the equipment sound system, the loudspeakers are matched to a power
■
output of the amplifier of 4x40 W + 6x20 W.

SETUP

Main menu set-ups (Setup)
›
Press the range selector key
SETUP
›
Select the area for which you wish to change the set-ups or carry out set-ups
by pressing on your selection.
›
Press on the function key , to switch back to the last selected menu.

Overview of the set-up menus
- When in the radio mode, carry out set-ups for the function of the arrow
Radio
keys, for the displayed memory keys, the memory list and the traffic reports.
- Determine the set-ups for the play and display of MP3 data and activate
Media
or deactivate the external audio sources.
- Change the system set-ups such as voice response and time and cancel
System
or delete stored set-ups in individual areas.
– Select your preferred TMC station and determine the area for TMC
Traffic info.
announcements.
- Adjust the brightness of the touch-screen, day/night design of the map
Display
display and select/deselect the confirmation tone for the key stroke.
– Update the telephone book in the unit, delete all call lists and modify
Telephone
the assignment of the shortcut keys.
Setup radio
Call up the menu Setup radio by pressing the selector key
key .
Radio
Activate AF
The function alternative frequency (AF) ensures that the best receivable frequen-
cy of the selected station is automatically and precisely set. The replay of the
broadcast can be muted briefly during the search process according to the best
to switch to the Setup main menu.
and the function
SETUP
Basic setting
Ð
Ð

11