Entering The Owner Name In The Opening Display - Yamaha Clavinova CVP-307 Owner's Manual

Display Settings
The explanation about picture
compatibility at right applies
also to the background of the
Song Lyrics display.
20 CVP-309/307 Owner's Manual
After selecting, press the [DIRECT ACCESS] button then press the [EXIT] button to
return to the Main display. The newly selected picture is shown as the background
of the Main display.
Importing a favorite picture for the Main display background
Even though a variety of pictures are available on the Preset drive, you can
load your own favorite picture data from SmartMedia card to the Clavinova
for use as background.
Make sure to use images no larger than 640 x 480 pixels.
If you select a picture file on the SmartMedia card, etc, the background may
take some time to appear. If you want to reduce this time, save the back-
ground from the CARD/USB drive to the USER drive of the Picture Selection
display.
If you select a picture file on the CARD/USB drive, the selected background
will not be displayed when the power is turned on again unless the same
media containing the data has been inserted into the drive.

Entering the Owner Name in the Opening Display

You can have your name appear in the opening display (the display that first
appears when the power is turned on).
1
Call up the operation display.
[FUNCTION] → [I] UTILITY → TAB[ √ ][ ® ] OWNER
2
Press the [I] (OWNER NAME) button and call up the Owner Name display.
Refer to page 67 for character-entry details.
Displaying the version number
To check the version number of this instrument, press and hold the [I]
(OWNER NAME) button in the display in step 2 above.