Vivotek IP7160 User Manual page 67

E-Preset Positions
A total of 20 preset positions can be configured. You can select preset positions for the camera to patrol.
Please follow the steps below to preset a position:
1� Adjust the shooting area to the desired position using the buttons on the right side of the window�
2. Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the
settings� The preset positions will be displayed under the Preset Location list on the left-hand side�
3. To add additional preset positions, please repeat steps 1~2.
4. To remove a preset position from the list, select it from the drop-down list and click Delete�
5� The e-preset positions will also displayed on the main page� Please refer to the illustration on page 69�
6� Click Save to enable the settings�
2
6
1
Functions are the same
as the Control Panel on
the home page
User's Manual - 67
VIVOTEK
2
4