Network - Vivotek IP7160 User Manual

VIVOTEK

Network

This section explains how to configure a wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed on a local area network (LAN) and is intended
to be accessed by local computers� The default setting for the Network Type is LAN� Rememer to click
Save when you complete the Network setting�
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by
the DHCP server each time the camera is connected to the LAN�
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera�
1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network
Camera on the LAN� Please refer to Software Installation on page 10 for details�
2. Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP.
TM
Enable UPnP presentation: Select this option to enable UPnP presentation for your Network Camera
so that whenever a Network Camera is connected to the LAN, shortcuts to those Network Cameras
will be listed in My Network Places� You can then click the shortcut to go directly to the web browser�
TM TM
Currently, UPnP is supported by Windows XP and Vista. Note that to utilize this feature, the UPnP
component must be installed on your computer�
User's Manual - 33