Vivotek IP7160 User Manual page 106

VIVOTEK
formertimezonein -489 ~ 529
dex
daylight_enable <boolean>
daylight_dstactual <boolean>
mode
daylight_auto_beg string[19]
intime
daylight_auto_end string[19]
time
daylight_manual_ <integer>
offset
daylight_manual_ string[19]
begintime
daylight_manual_ string[19]
endtime
updateinterval 0,
3600,
86400,
604800,
2592000
enableir <boolean>
restore 0,
<positive integer>
reset 0,
<positive integer>
106 - User's Manual
Kong, Kuala Lumpur, Singapore, Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New
Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6 Record the last time zone for time jump when
changing time zones.
6/6 Enable automatic
zone.
6/7 Check if current time is under daylight saving
time.
6/7 Display the current daylight saving start time.
(product dependent)
6/7 Display the current daylight saving end time.
(product dependent)
6/6 Manually set daylight saving time with offset.
6/6 Manually set daylight saving time beginning.
6/6 Manually set daylight saving time end.
6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between
NTP automatic update intervals.
6/6 Enable IR control
(capability.nir>0)
(product dependent).
7/6 Restore the system parameters to default
values after <value> seconds.
7/6 Restart the server after <value> seconds if
<value> is non-negative.
daylight saving time in time