Using 3Gpp-Compatible Mobile Devices - Vivotek IP7160 User Manual

Using 3GPP-compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet� For more information on how to set up the Network
Camera over the Internet, please refer to Setting up the Network Camera over the Internet on
page 7�
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable�
For more information, please refer to RTSP Streaming on page 46�
2. As the the bandwidth on 3G networks is limited, larger video sizes are not available. Please
set the video and audio streaming parameters as listed below�
For more information, please refer to Audio and Video on page 53�
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
Audio type (GSM-AMR)
3. As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554. For more information, please refer to RTSP Streaming on page 46�
4� Launch the player on the 3GPP-compatible mobile device (ex� Real Player)�
5� Type the following URL command into the player:
rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming access name for
stream1 or stream2>�
For example:
MPEG-4
176 x 144
5 fps
1S
40kbps
12.2kbps
rtsp://192.168.5.151:554/live.sdp
VIVOTEK
User's Manual - 15