Drive The Digital Output - Vivotek IP7160 User Manual

VIVOTEK
Group: eptz_c<0~(n-1)> for n channel product.
PARAMETER VALUE
osdzoom <boolean>
smooth <boolean>
tiltspeed -5 ~ 5
panspeed -5 ~ 5
zoomspeed -5 ~ 5
autospeed 1 ~ 5
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product. and m is the number of streams which
support ePTZ.
PARAMETER
patrolseq
patroldwelling
i<0~19>_name
i<0~19>_pos
i<0~19>_size

Drive the Digital Output

Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>]
134 - User's Manual
SECURITY DESCRIPTION
(get/set)
1/4 Indicates multiple of zoom in is "on-screen display" or not
1/4 Indicates ePTZ is smooth or not.
1/7 Tilt speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
1/7 Pan speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
1/7 Zoom speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
VALUE SECURITY
(get/set)
string[120] 1/4
string[160] 1/4
string[40] 1/7
<coordinate> 1/7
<window size> 1/7
DESCRIPTION
The indexes of patrol points, separated by ","
The dwelling time of each patrol point, separated by
","
Name of ePTZ preset.
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Left-top corner coordinate of the preset.
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Width and height of the preset.
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)