Menu Bar - ViewSonic PJL6243 User Manual

Basic Operation
For detailed functions of each menu, see "Menu Tree" on pages 66-67.
Main Menu
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
① Input
Used to select an input source from Computer 1, Computer 2 or Video (pp.27, 36-37).
② PC adjust
Select Auto PC adj ., Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp, Display area-
H and Display area-V to adjust the parameters to match with the PC input signal format (pp.29-31).
③ Image select
Used to select an image mode from among Dynamic, Standard, Real, Cinema, Blackboard(Green),
Colorboard and Image 1-4. (pp.32, 39)
④ Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Iris, Color temp ., White
balance (R/G/B), Sharpness, Gamma, Reset and Store] (p.33).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Iris, Color temp .,
White balance (R/G/B), Sharpness, Gamma, Noise reduction, Progressive, Reset and Store] (pp.40-
41).
⑤ Screen
For computer source, used to adjust size of the image [ Normal, Full, Wide(16:9), Zoom, True, Custom,
Custom adj., Digital zoom +/– , Keystone, Ceiling, Rear and Reset] (pp.34-35).
For Video source, used to set size of image [Normal, Full, Wide(16:9), Zoom, Custom, Custom adj.,
Keystone, Ceiling, Rear and Reset] (pp.42-43).
⑥ Sound
Used to adjust the volume or mute the sound or set configurations to the MIC functions (p.24).
⑦ Setting
Used to set the projector's operating configurations (pp.44-56).
⑧ Information
Display the input source information: Input , H-sync freq ., V-sync freq ., Screen, Language, Lamp
status, Lamp counter , Power management, Key lock, PIN code lock and Remote control. (p.57)
⑨ Network
See User Guide of "Network Set-up and Operation".
⑩ Guide
The key operation is displayed.
ViewSonic

Menu Bar

Sub-Menu
22
22
PJL6243