Setting Up The Projector; Screen Setting - ViewSonic PJL6243 User Manual

Setting up the projector

Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.

Screen setting

This function is to adjust the screen mode of
the projector. The values in the text box rep-
resent the current screen status.
Item Description
Screen ..................... Switches the screen mode. (Normal, Full, Wide(16:9), Zoom, True, Custom) There may
not be available mode depending on the input mode as shown in the table below.
Ceiling ..................... Sets the image top/bottom and left/right reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON, OFF)
Reset......................... Resets the Screen settings.
Input source
Screen mode Video Computer
Normal
4
Full
4
Wide(16:9)
4
Zoom
4
True *
Custom
4
ViewSonic
4
4
4
* The mark "
4
in the selected input source system. The error message
4 appears when selecting the disabled screen mode indi-
cated with "*".
4
39
39
Setting up the projector
" means that the available screen mode
4
PJL6243