Connecting To A Macintosh - Toshiba PDR-M500 Instruction Manual

Connecting to a Macintosh

The Macintosh must have Mac OS 9.0 or later installed. Because this camera supports
the USB Mass Storage Class, a Macintosh with Mac OS 9.0 or later does not require the
installation of the USB driver.
Important • The data saved to the SD card may be damaged if the power to the camera is turned
OFF during image transfer. We recommend that you use the AC adapter when
connecting the camera to the PC.
Insert the supplied CD-ROM into the CD-ROM drive.
Click the [
Click the [
Turn the mode dial to [
cable.
92
The language selection window appears.
] icon.
] icon.
Setting up is started.
Follow the shown instructions to install
ACDSee.
When the installation is completed, the
ACDSee icon appears on the desktop.
], then connect the USB
Connect one end of the USB cable to the USB
port on the PC, and the other end to the
DIGITAL terminal on this camera.
When connecting the USB cable, be careful
with that the [ ] mark on the cable plug
faces toward the lens.
When the computer recognizes the camera the
ACDSee Device Detector starts.