Table of Contents
Advertisement
Mark the "Copy image to hard drive" and "Launch
ACDSee" checkboxes in the screen that is displayed,
and click "Next".
Specify the directory and name of the folder to save to,
and click "Next".
• When the camera is connected to the PC, the camera is displayed as a removable disk.
Memo
• With the USB driver installed, simply reconnecting the USB cable causes the PC to
automatically identify this camera so that images can be transferred.
• To connect the USB cable smoothly and properly, pay attention to the shapes of the
connectors on the cable.
• When in connection with the PC, auto power OFF funciton does not operate.
To merely view the image without copying it
to the PC, unmark the "Copy image to hard
drive" checkbox, and mark only the "Launch
ACDSee" checkbox.
Copying images is started.
Enter the name of the folder to save the
copying images to (The save directory will
be created).
The directory containing the copying
image is displayed (You can specify any
directory by clicking "Browser").
To delete an image from the camera's SD
card after a copying images is completed,
mark the "Delete images from memory card
after copying them" checkbox.
When the copying images is completed,
ACDSee starts up, and the images in the
folder that is specified to save to are
displayed. The file names of the copied
images are indicated as "date+3-digit
number".
89
Hide quick links:
Advertisement
Table of Contents
