Using The Ac Power Adapter - Toshiba PDR-M500 Instruction Manual

Using the AC Power Adapter

You can use the camera for a longer time if the AC adapter (sold separately) is used indoors
or at other locations where there is a power outlet. This also prevents failed photographs
due to battery wear and failed data downloads to the PC. For details about handling the AC
adapter, thoroughly read "Handling the AC Adapter Correctly" (
Important • Before connecting or disconnecting the AC adapter, be sure to turn the power OFF.
Neglecting this could cause malfunction and/or damage saved image data even with
the batteries loaded.
• Connecting and disconnecting the AC adapter with the power ON may cause settings
to be restored to their defaults. If this happens, manually set the settings again.
• When the AC adapter is used after camera operation has not ended properly, the
camera may not start up correctly. In this case, turn the power OFF, then back on again.
• Batteries cannot be recharged on the camera. Use a charger (commercially available)
to charge Nickel Metal Hydride batteries.
Before starting
Make sure that the power is turned OFF.
Insert the plug from the AC adapter into the DC IN 5V
terminal.
Connect the AC cable to the AC adapter.
Insert the AC power plug on the AC cable to an AC wall
outlet.
22
3
2
page 14).
1